6 MP - 30" highbrightness LED Color LCD
The CCL650i2 is a dual 3MP Display solution. It offers a full diagnostic workstation on one screen. This increases flexibility and improves workflow. With high luminance and high contrast, and an integrated color calibration function, our CCL650i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL650i2 includes a luminance compensation feature for edge to edge consistency and is fully configurable for multi-display applications.
- 30" Color LCD
- 6 megapixel
- 1640 ×2048(Fv=60Hz), 3280 × 2048(Fv=30Hz)
- Maximum luminance 800cd/m²
Next Generation Interface - DisplayPort
The dual-Input concept of CCL650i2 is as flexible as you need it. You can choose do drive it with one signal - DVI or DisplayPort - or you can connect two signals, no matter if they are supplied by one or two workstations. This enables all different combinations and ensure that hanging protocols from your PACS solution are maintaned.
To switch between inputs is just at your fingertips. The direct input switch is just right there enabling seemles switching if you use multiple workstations or inputs.
The greenest Displays we ever build
Totoku is committed to providing high performance display systems that are ecological and environmentallyfriendly. We strive to create green IT initiatives and be a part of building a clean energy future. In eort toachieve this, we have incorporated new power-saving features in our i2 series displays.
Our internal power supply system includes a newly improved power save mode, which allows the display to enter standby mode with less than 2 watts of energy consumption.
3 Megapixel Emulation mode
Due to the double 3MP+ resolution older videocards eg. Matrox MED3MP or Rad Cards are not able to driver the CCL650i2 out of the box. The integrated 3MP mode simulates a normal dual 3MP workstation.
Lambda Sentinel II - Advanced Sensor System
Sentinel II consists of a luminance sensor and a luminance control circuit. The luminance sensor in integrated into the front bezel, directly against the screen, and constantly monitors and accurately stabilizes luminance on the screen surface by sending feedback instantaneously to the control circuit.
Result is a very stable image quality with a day by day diagnostic confidence.
Front Sensor and PM Medivisor - The perfect match
Together with PM Medivisor you can get all additional benefits from the sensor systen by enabling remote calibration and remote conformance testing.
With the TOTOKU Software solutions and remote management you become the QA expert. The Medivisor suite makes calibration and testing as simple as possible. With PM Medivisor you enleash the full remote functionality.
All remote features are so advanced that you don't even get noticed. The integrated front sensor checks constantly the image quality. This data is send to the server and avaiable by a webinterface you can access from any workstation.
Calibration tasks can be scheduled and executed remotly with the front sensor. This cuts maintenance time and affort. The email notice function sends messages in case of too high ambient light, changed configurations or trouble.
To give you confidence in the image quality all i2 models are equipped with state of the art technology.
LED is the new standard for backlight and brings a lot of advantages. Especially from a financial point of view LED is the future technology. LED saves up to 20% energy and the extended lifetime of up to 20% helps tight budgets.
LCD Panel Technology 30.0-inch, TFT color active matrix IPS technology Display Area 645.5mm x 403.05mm Pixel Pitch 0.197mm x 0.197mm Contrast Ratio 1000:1 (typ) Maximum Luminance 800cd/m² (typ), (calibrated to 410cd/m² and 300cd/² by factory default) Viewing Angle 170° horizontal and vertical (typ) Visual Performance Native Resolution 3280 x 2048?at Fv=30Hz??1640 x 2048?at Fv=60Hz? Grayscale 16.77million colors out of 68 billion color 1073.74 million colors (DisplayPort 10bit input). Input Signal Input Sync Signal DVI-D (DVI 1.0 compliant) DisplayPort (DisplayPort 1.1a compliant) Plug and Play DDC2B compliant Input Power Supply Input 100V ~ 240V (±10%) 50/60Hz Maximum Power Consumption 180W typ. (with power management feature) Features Calibration Control Luminance, Gamma, Capability of saving 3 sets of LUT settings (An optional calibration kit is required.) OSD Information Display Model name, Serial No., Total operating time,
Calibration settings (Operating time since last calibration,
Luminance, Gamma), Current luminance and ambient light
USB Hub USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2) Other Features Luminance Uniformity Correction, LED indicator, Configurations switching function ANSI/AAMI ES60601-1(2005)+A1(2012),
CAN/CSA-C22.2 NO. 60601-1(2008),
CE, FCC-B, ICES-003-B, VCCI-B, FDA510(k)*,
J-Moss, RoHS *Under proceeding
Physical Characteristics Dimensions (WxHxD) 695.6mm x 512.1/573.6mm x 243.5mm Weight About 15.5kg Tilt Stand Tilt, Swivel Mount Vesa mounting 100mmx200mm, 100mmx100mm Security Slot On the back of the panel and the tilt stand Accessories Power cord, DVI cable x2, DisplayPort cable x2, USB cable,
*Cleaning kit (Special AR coating model only)